Tech Forum

We are unable to establish functional Wi-Fi communication in Station Mode.

We have confirmed the correct SSID and Password for our shop's network. We have tested both DHCP (setting PDM IP to 0.0.0.0) and Static IP (e.g., 192.168.X.X), but the connection remains unusable or fails. Crucially, the PDM Configurator does not provide fields for Subnet Mask or Gateway. What are the assumed default values for the Gateway/Subnet Mask in Station Mode, and what is the correct procedure for forcing DHCP?

Hi All,

I have a PDM28 running all functions of a 1972 Corvette. It works beautifully, but I have run across something I want to do that seems very basic, but I don't see an obvious answer.

My rear parking lights are too bright and I want to run them at 50% duty cycle. I don't think I need to map this to another variable, I just want them at 50% when they are on. What is the output configuration I need to set?

I'm wondering if I will be able to use this OEM wiper switch. It would use 2 inputs to the PDM - one would be variable resistance to + or - depending on how the switch gets wired, and the other would just be for high speed activation. On low or delay the resistance would vary depending on the switch position. I do not yet know the resistance values, I'll have to get a switch to test.

Any thoughts or ideas would be appreciated.

I don't see any firmware downloads on your website. Can you give me access to them? Additionally, the instructions that came in the box appear to be for the V1. The directions I found on your website Version 1 - 23/6/25 also appear to be for the V1. Are there new instructions for the V2? I ask because the windows on the V2 don't looks the same as in the instructions.