Switch Panel - 10 Switch

Switch Panel - 10 Switch

The Hardwire Electronics range of switch panels have been designed to make the process of installing a switch panel in a vehicle as simple as possible, while increasing the reliability and maintainability of the electrical system.

In a conventional switch panel, the user would need to run individual wires to the back of each switch and connect to them with a female spade connector. For installations using multiple switches, this process can quickly become messy and disorganised. The process of removing and reinstalling a wiring harness also introduces the possibility for these wires to be reinstalled incorrectly, potentially causing damage to the wiring assembly.

The Hardwire Electronics range of switch panels address these issues, by internally routing each switch to a reliable Deutsch DTM 12-pin header. Installing the switch panel becomes as simple as plugging in one connector, removing the possibility of mixing up any wires and causing damage to the wiring assembly. The range of switch panels have been designed to interface seamlessly with the Hardwire Electronics range of PDMs (Power Distribution Modules), requiring no extra pull-up or pull-down resistors.

Two versions of the switch panel are available – All latching toggle switches, or all latching with one momentary toggle switch. In both variants, the output of each switch is toggled between power and ground, depending on the position of the switch lever.

Hardwire Electronics uses the highest quality, marine grade Carling switches to ensure the reliability and longevity of each switch panel. Each switch is easily replaced if problems occur, and is as simple as unplugging a faulty switch and plugging a replacement part back in.

Each Hardwire Electronics switch panel comes with an expansive sticker sheet and a Deutsch DTM 12-Pin connector with contacts.

The switch panels are designed to fit into standard DIN slot heights.

General Features 

  • Front Panel Size: 204x54mm

  • Rear Cover Size: 174x49mm (50mm depth)

  • Weight: 460g

  • Current Capacity: 8 Amps combined

 

Switches

  • Type: Carling F-series on-off (or mom-off-mom)

  • Switch Lifetime: 50000 toggles

 

Connector

  • Type: 12-pin Deutsch DTM

£145.00Price
Switch Option
  • LinkedIn - Black Circle
  • Instagram - Black Circle
  • Facebook - Black Circle

©2020 Hardwire Electronics Ltd