General Features

Inputs

Type: 16 Analogue inputs, which can also serve as digital inputs
Measurement Range: Each input can measure between 0V-6V
Measurement Resolution: 10-Bit, or 0.01V
Protection: Fully protected for input voltages from -24V to 40V
Added Features: Current sourcing for ground switch detection. Configure as active high or low. Configurable Hysteresis voltage. Latching or momentary operation.

Outputs

Type: 15 High side outputs 80A peak, 20A continuous.
Combined: 180A combined output maximum current
Output Current Control Steps: 100mA (0.1A)
Protection: Each output is overcurrent, overtemperature, load dump and reverse polarity protected.
5V: One 5V, 500mA output for supplying external sensors/Hardwire Electronics CAN Keypad
Added Features: Outputs can be configured to stay on for a specified time after the input is removed, useful for thermo-fans. Outputs can be retried multiple times after an over-current event is detected.

CAN Bus

Interface: 1x CAN2.0A/B
Bus Speed: 50kbps, 100kbps, 125kbps, 250kbps, 500kbps, 1000kbps
Input Stream: 40 Inputs, fully customisable variable parsing with bit masking and math functions
Output Stream: 40 Outputs, fully customisable CAN frame construction with math functions
Multiple Aftermarket CAN devices supported via CAN config files

Data Logging

Storage: 128Mb of onboard flash storage for logging PDM data
Speed: 0.1Hz to 50Hz
Viewing: Data can be downloaded and graphed via the Hardwire Electronics PDM configurator software

Functions

Bluetooth

USB

PC App