Hopefully you guys are not getting tired of me :) Anyway I've got everything up and running now with the latest update. I started the vehicle up and everything was great then it died and my Megasquirt went offline. Keyed the truck off then back on and all was good for another couple minutes and the same thing. I pulled the data logs and noticed that the output status for the Megasquirt's output was 2. Is 1 on and 2 off? On the inputs it seems to be 0 off and 1 on. Or does it mean something else like it tripped the fuse? I was logging the Megasquirt current at 10Hz perhaps that is too slow to catch the event as the datalog is all zeros with the occasional 0.163 ?
Is there a list (cheat sheet) off all numeric status values? That would come in very handy!
Double post
Just saw this in another post, Looks like output is going over current limit.
Hi, Before V114, the output status would be 0 for off, 1 for on. Now it is
0 -> off
1 -> on
2 -> over current trip
3 -> under current trip
There is an inconsistency with the dedicated Hardwire CAN Output stream, which has the following format for output status'. This will be fixed in an upcoming software update.
0 -> off
1 -> on
2 -> under current trip
3 -> over current trip