Canbus stream not sending voltage values
I have a project that im working on that im looking to stream all of the voltages from the inputs directly to another canbus device and it looks like nothing is coming in on the input #6 and 7 which are setup as temperature sensors (and are at 2.3v in the first input picture) Kvaser on the same bus is capturing that 00xx data is coming through even though there is definitely voltages on this input. This specifically seems to only affect the inputs, the outputs do output the proper voltage all the way down to 0v atleast on the HS, not sure about the LS. This isnt a major issue on this project, just wanted to bring it up to the developer for fixing in the future.
2 Views