PDM CAN output to FT550
Sorry if this is a duplicate as I swear I have read something similar but could not find it. I have the PDM 25, a 15 button Keypad, and a FT550. I am reading data from the FT550 into the PDM and have the keypad connected and can see that in the PDM. I would like to setup the CAN output of the PDM to allow the FT550 to read messages like they have been sent from the mini-8 keypad. I assume Fueltech doesn't do much with the keypads they brand and it's just standard keypad messages with a certain ID. Any pointers in the right direction would be appreciated.
Josh
180 Views
The Fueltech Switchpanel sends the status in 1 second cycle plus on a change event. So you need a double trigger to simulate it with the PDM.
In my mind the FT panels hasn't a serial number or version too. So you can't find a message to do this. The ECU won't understand ;-)
The panel is quite simple and don't uses the FTCAN2.0 protocol like the Nano or GearController.
PS: TManiac = Jens :-D