Changer Keypad from J1939 to Canopen
Hi Guys, so somehow I messed up and ordered my Blink Marine 12 buttons keypad with the J1939 protocol loaded in. I am able to see the Can data under the canbus analyser when I set my bitrate to 250kbps but the keypad show as disconnected and no buttons or LED is active. The ID in the analyser is 0x18EFFF21.
Using the CAN Transmit function of my PDM configurator, how can I change the Protocol from J1939 to Canopen? Keypad is the PKP-2600-SI model
231 Views
Follow the video on our YouTube channel for changing the keypad baud rate. Then instead of sending the baud rate change command, send the j1939 to canopen command found in the keypad user manual