[PDM 25] Configuring CAN Output to FuelTech FT700 (Data Logging)
We have successfully configured the CAN link to receive data from the FT700 (CAN Input), but we now need to configure the PDM to transmit its data (CAN Output) to the FT700 to create a centralized log on the ECU.
Which PDM CAN Output setting (e.g., predefined stream, generic stream, or DBC export) should be used, and what is the specific CAN ID and message structure we must configure in the PDM to be compatible with the FuelTech FT700's input format?
Our goal is to stream critical PDM data (such as Output_X_Status and Output_X_Current) so that the FT700 can capture them in its own datalog.
46 Views
This is where you will need to do custom CAN input to the FT700 and custom CAN outputs from the PDM. I have not worked with an FT700 before so I am not too familiar with it, but I can assist with CAN outputs on the PDM side.