[PDM 25] Output Activation Without Ignition Input (Persistent Output)
We are attempting to activate an output (Output X) persistently when the main battery is connected, without relying on the Ignition/Key-on Input (ignition on).
We confirmed that forcing the output ON works successfully while the PDM is connected via USB (using the Test Outputs feature).
However, when running on battery power alone (USB disconnected), the output fails to remain active. We cannot find a direct "Always ON" or TRUE setting that bypasses all other logic, including a potential dependence on the Pós-Chave line. What is the correct logical function to use to ensure an output remains ON whenever the PDM is powered, regardless of the Ignition Input status?
38 Views
On race cars I wire the ignition on to main cut off switch. If you want an output always on, set logic to true equals true. the PdM needs power on the ignition input for the outputs to work.