Voltage Reading and Output Inconsistent
Just finished installing PDM25 system, updated to 1.1.6 via usb beforehand, connected power and ground keypad lite up initially. Connected laptop to PDM, loaded input/output configurations I had made previously. When looking at system information, battery voltage started at 1.68 Volts and slowly went up to 5.61 Volts and never went past that. Measured voltage at input stud and 12v ign switch pin both reading 13v. Ground pin reads no resistance, even added ground direct to battery. Outputs are receiving same voltage, and therefore not powering on. Any ideas?
253 Views
HI Chris, Can you let me know exactly how you have the groud pin wired and also the ignition input?