top of page

Tech Forum

Public·86 members
Back
Chris Amor
Chris Amor

Can PDM25 read ABS sensor input

Looking to run traction control setup with Fueltech FT600, is it possible to run the sensors to the PDM directly or will they require a pull-up? Then from there send them via CAN

208 Views
George Stokes
George Stokes
Oct 05, 2023

The PDM inputs can only measure absolute voltage and not the frequency of the input signal. This means that the PDM wont be able to detect wheel speed on its inputs.


Active Traction Control
www.fueltech.net
Active Traction Control
PRODUCTS YOU WILL NEED 👉 Hall Effect RPM / Speed Sensor 👉 Driveshaft Sensor with Collar 👉 ANY POWERFT ECU 1. Open the FTMANAGER Software, go to Map Options and enable Active Traction Control.  2. Next, under Sensors & Calibration, go to the inputs screen and set up the Wheel Speed Sensor. * You need at least 1 fron

maybe have a look at this, it seems the FT can do it without having to involve the PDM.

Members

See All Members (86)
bottom of page